PROJECTS

PROJECTS

HOUSTON

SAWING & DRILLING CO. INC.

PROJECTS

HOUSTON

SAWING & DRILLING CO. INC.

HOUSTON

SAWING & DRILLING CO. INC.

Client: MARINE METALS - BROWNSVILLE, TEXAS
Objective: To enlarge opening of Dry Dock to allow larger ships to pass through. For dismantling, Houston Sawing & Drilling wire sawed 5 ft. thick x 7 ft. wide x 17 ft. high sections out of both sides of Dry Dock. Most of the work was under water.
Client: GEORGE BUSH INTERNATIONAL AIRPORT - HOUSTON, TEXAS
Objective: Saw cut grooves on runway for traction. Houston Sawing & Drilling worked around the clock to saw cut grooves in 10,000 ft. of new runway to meet FFA Specifications.
Client: TEXAS DEPARTMENT OF TRANSPORTATION - HOUSTON, TEXAS
Objective: Grind W. Park Tollway to meet TxDot Ride Quality Specifications. Houston Sawing & Drilling used their Highway Pavement Grinder to grind numerous miles of pavement to reach an acceptable ride quality.
Client: FREEPORT LNG PLANT - QUINTANA ISLAND, TEXAS
Objective: Drill 600 1 3/8” dia. x 10” deep holes to mount catwalk around LNG Holding Tanks. In order to drill holes quickly, Houston Sawing & Drilling Used 3 - speed hand held core drills to complete project before Plant Opening.
Client: ROHM AND HAAS - HOUSTON, TEXAS
Objective: Plant needed a 72” dia. hole in an elevator floor 11” thick of a Distillation Unit to set a 70” O.D. Vessel. Houston Sawing & Drilling used a wire saw with a Hydraulic Activated Arm, designed and built in house, to guide the wire to cut the 72” hole.
Client: CLOEREN INCORPORATED - ORANGE, TEXAS
Objective: To cut out 120’ x 40’ area in machine shop floor without creating vibration that would throw off their computer controlled machine centers. Houston Sawing & Drilling used a combination of diesel power concrete saws and core drills to cut through the slab. A 72” diamond blade was used to cut through the 30” thick beam. Drilled corner to eliminate over cuts. Concrete was lifted out in blocks.
CALL TODAY!
Client: MARINE METALS - BROWNSVILLE, TEXAS
Objective: To enlarge opening of Dry Dock to allow larger ships to pass through. For dismantling, Houston Sawing & Drilling wire sawed 5 ft. thick x 7 ft. wide x 17 ft. high sections out of both sides of Dry Dock. Most of the work was under water.
Client: GEORGE BUSH INTERNATIONAL AIRPORT - HOUSTON, TEXAS
Objective: Saw cut grooves on runway for traction. Houston Sawing & Drilling worked around the clock to saw cut grooves in 10,000 ft. of new runway to meet FFA Specifications.
Client: TEXAS DEPARTMENT OF TRANSPORTATION - HOUSTON, TEXAS
Objective: Grind W. Park Tollway to meet TxDot Ride Quality Specifications. Houston Sawing & Drilling used their Highway Pavement Grinder to grind numerous miles of pavement to reach an acceptable ride quality.
Client: FREEPORT LNG PLANT - QUINTANA ISLAND, TEXAS
Objective: Drill 600 1 3/8” dia. x 10” deep holes to mount catwalk around LNG Holding Tanks. In order to drill holes quickly, Houston Sawing & Drilling Used 3 - speed hand held core drills to complete project before Plant Opening.
Client: ROHM AND HAAS - HOUSTON, TEXAS
Objective: Plant needed a 72” dia. hole in an elevator floor 11” thick of a Distillation Unit to set a 70” O.D. Vessel. Houston Sawing & Drilling used a wire saw with a Hydraulic Activated Arm, designed and built in house, to guide the wire to cut the 72” hole.
Client: CLOEREN INCORPORATED - ORANGE, TEXAS
Objective: To cut out 120’ x 40’ area in machine shop floor without creating vibration that would throw off their computer controlled machine centers. Houston Sawing & Drilling used a combination of diesel power concrete saws and core drills to cut through the slab. A 72” diamond blade was used to cut through the 30” thick beam. Drilled corner to eliminate over cuts. Concrete was lifted out in blocks.
CALL TODAY!
Client: MARINE METALS - BROWNSVILLE, TEXAS
Objective: To enlarge opening of Dry Dock to allow larger ships to pass through. For dismantling, Houston Sawing & Drilling wire sawed 5 ft. thick x 7 ft. wide x 17 ft. high sections out of both sides of Dry Dock. Most of the work was under water.
Client: GEORGE BUSH INTERNATIONAL AIRPORT - HOUSTON, TEXAS
Objective: Saw cut grooves on runway for traction. Houston Sawing & Drilling worked around the clock to saw cut grooves in 10,000 ft. of new runway to meet FFA Specifications.
Client: TEXAS DEPARTMENT OF TRANSPORTATION - HOUSTON, TEXAS
Objective: Grind W. Park Tollway to meet TxDot Ride Quality Specifications. Houston Sawing & Drilling used their Highway Pavement Grinder to grind numerous miles of pavement to reach an acceptable ride quality.
Client: FREEPORT LNG PLANT - QUINTANA ISLAND, TEXAS
Objective: Drill 600 1 3/8” dia. x 10” deep holes to mount catwalk around LNG Holding Tanks. In order to drill holes quickly, Houston Sawing & Drilling Used 3 - speed hand held core drills to complete project before Plant Opening.
Client: ROHM AND HAAS - HOUSTON, TEXAS
Objective: Plant needed a 72” dia. hole in an elevator floor 11” thick of a Distillation Unit to set a 70” O.D. Vessel. Houston Sawing & Drilling used a wire saw with a Hydraulic Activated Arm, designed and built in house, to guide the wire to cut the 72” hole.
Client: CLOEREN INCORPORATED - ORANGE, TEXAS
Objective: To cut out 120’ x 40’ area in machine shop floor without creating vibration that would throw off their computer controlled machine centers. Houston Sawing & Drilling used a combination of diesel power concrete saws and core drills to cut through the slab. A 72” diamond blade was used to cut through the 30” thick beam. Drilled corner to eliminate over cuts. Concrete was lifted out in blocks.
CALL TODAY!

CONTACT US

CONTACT US

CONTACT US

Share by: